Cyclone 2kW wind turbine
Joliet 2kW wind turbines
The Cyclone 2kW wind turbine is a small to mid range wind turbine for domestic applications, ideally suited to battery charging, or use in a hybrid configuration with solar modules.
The Cyclone 2kW wind turbine is a good choice for low power consumers, back up power requirements or DC power supply for remote applications.
Joliet wind turbines are supplied with an electronic controller system which conditions the power produced for battery storage or direct AC supply through an inverter. Small wind turbines use a 'tail' to automatically position the turbine into the wind and 'stall' the blades in high winds to prevent damage to the turbine.
Small wind turbines offer up to 20kW and can be easily erected to operate effectively in most areas of the world. Approximately 60% of the Earth’s surface has enough wind for small turbines to generate electricity.
options...
Tower options
The Cyclone
2kW wind turbine can be installed on a
sectional 8
meter free standing tower as shown above, or on a
9 meter guyed tower as in the picture to the right. The
guyed tower is designed for 'tilt up' installation with
a hinged base plate. Free standing towers require a
small crane for installation.
Inverter options
Most propriety 48v/220v inverters are compatible with this wind turbine. Joliet supply an 'off grid' inverter as standard with this wind turbine. This wind turbine is not recommended for connection to the local electricity grid.
technical specifications...
Joliet 2kW Cyclone wind turbine
Rotor Diameter(m): 3.2
Start up wind speed: 2.5ms
Rated wind speed: 9ms
Cut out wind speed: 15ms
Max.output power(W): 2300
Output voltage(VDC): 48
Noise level:29.5db
Grid feed: option with grid compatible inverter
Furling: tail vane yaw control
performance...
Joliet 2kW Cyclone wind turbine
The instantaneous power production of this wind turbine is the actual power it produces at any one time. The power produced increases as wind speed increases. This wind turbine 'furls' away from the wind as wind speeds become too strong for power production. As the graph below shows, production drops off as maximum capacity is exceeded, slowing the wind turbine by turning away from the wind.
The average total annual output of a Joliet 2kW wind turbine is the power produced in kWh during 12 months at a fixed average wind speed. The example below shows the annual production for this turbine at a wind speed of six meters per second (around 21Kilometers per Hour). You can download a detailed table of power production at different wind speeds by clicking here.
price guide...
- Joliet 2kW wind turbine generator supplied with 3 composite blades, power supply cables, tail assembly and rudder plate, battery charge controller, nose cone and fixings. 9 meter guyed tower supplied in 3 sections with flange bolts, guy cables, foundation rods and fixing nuts. 2kW/220VAC (single phase) off grid inverter: 4010.00 Euros
This wind turbine kit is available as an online purchase. Please click here to buy online.
Tower options:
- 9 meter guyed tower supplied in 3 sections with flange bolts, guy cables, foundation rods and fixing nuts.
- 8 meter Freestanding tower supplied in 3 sections with flange bolts, foundation rods and fixing nuts.
Inverter options:
- 2kW/220VAC (single phase) off grid inverter.
Prices are net ex works Figueres Spain and do not include delivery or shipping charges. Distributors and trade buyers please contact us for prices related to quantity requirements or regular orders.
installation...
Installing a Joliet wind turbine is not complicated, the installation process is carried out in three basic stages. The foundations depend on the tower type chosen and require a hole with a trench to carry power cables to the consumer. Foundation anchors to support the tower are supplied by Joliet and are set into the poured concrete base. Once set, the foundation is ready to receive the tower.
The assembly of the wind turbine is carried out on the ground. Once the turbine and tower sections are assembled the complete unit is raised to a vertical position (depending on tower type) and fixed to the foundation anchors.
The electrical connections can now be made linking the turbine to the controller, inverters or batteries and finally to the consumer.
ordering your wind turbine
Joliet 2kW wind turbines are usually available from stock.When you are ready to order your wind turbine please contact us with your requirements and shipping address. You will receive a detailed quotation indicating a delivery date, delivery cost and payment conditions. Please note that Joliet do not supply batteries which are readily available from local suppliers.
Useful links and downloads
Why choose a Joliet wind turbine? - Latest installations
Wind turbine user and installation manual - Foundation technical details
